PanOceania auxilla unit

My pan o auxilla unit arrived in the post today and I couldn't resist getting started on them immediately..,

Army painter blue primer then a basecoat  of blue and grey then I gave it a wash of agrax earth shade...

Repainted the raised areas of blue and grey with the original colours 

Highlighted along the raised edges with lighter blue and grey and painted the base...

Painting operation icestorm, Pan Oceania

Hello again...

I've recently really got into infinity so have decided to paint up the panoceania half of the operation icestorm set. 

 

Father knight and Orc trooper..

Akalis and nisse...

The 3 fusiliers...

And the whole gang...

I'm pretty happy with the work so far.

I have a few more pan o models on the way so will do some work in progress shots which I forgot this time!

Homemade Mek gunz part 4

I've finished building my Mek guns from the ork trukk kit and now I'm gonna paint them up into my army colours.

First I give the model an undercoat of red/brown primer from vallejo...

Then I spray the chassis and armour plates with fire red from vallejo...

I then hand painted the wheels with gw leadbelcher...

I then painted the tractor gunz orbs blue, all the glyphs yellow, and gun barrel bronze. I then gave the whole model a heavy wash of agrax earthshade....

After the model dried I gave the entire model a drybrush of leadbelcher to give the model that worn down look...

That's it for now, I've just got to paint up the gretchin crew and they will be good to go.

Homemade Mek gunz part 3

Here's part 3

So now the tractor gunz...

I'm using the spare bombs from the ork flyer kit to make the main body of the guns

I've shaved of the fins at the back ensuring to keep the bits for later..

I have then taken the prods from the gretchin kit and a Mek head to make the 

Barrel...

I attached the barrels to the body of the guns...

Then trimmed and glued the semicircle piece of plastic from the fin to the chassis as a gun mount....

And the finished article..

With crew..

And that's it, hope you like it please comment if you do....

I will paint it and post that up another day.

 

Homemade Mek gunz part 2

Part two of my attempt to make my own Mek gunz.

I'm starting by collecting the parts I need out of my bitz box I've got..

Various dakka jet parts

Some lynchguards bodies for the orbs

So let's get started with the gun chassis..

Wheels and axles from the trukk

I glued the wheels and axles together in the standard way ...

Next I sawed the chassis from the truck  into 3 pieces ensuring I kept an axle mount on each piece...

I then cut a boarding plank in half and glued them to the chassis pieces in order to lengthen the two shorter chassis pieces...

I have then glued the armour plates from the trukk to the front of each chassis...

Now on to the guns......

Home made Mek gunz part 1

The high cost of Mek gunz has put me off but after seeing how good tractor cannons are in game I've decided to build my own.

My plan....

To make my own Mek gunz using a ork trukk kit an 2 gretchin boxes

3 Mek gunz from gw £84

Trukk and 2 boxes of grots £42.50 

So pretty much half price...

The boxes..

The sprues....

As you can see there are loads of nice bits and pieces to make the guns from..

goblin decks in magic

I love magic the gathering, not ashamed to admit its one of the best games I've ever played and those that know me know I've got a particular affinity for goblins...


...for me there is nothing that embodies the fun and speed of magic more than goblin cards and goblin decks, the great art, the fact that they are mana cheap and weak but work so well together its just so much fun to play them,

im gonna go through one of my goblin decks here and show what im going on about

my goblin deck:

goblin guide



a turn one 2-2 with haste for 1 mana!!! forget that he allows the opponent (and you)to see the top card of their library, who cares!!

next is

legion loyalist


this hasty little guy helps so much its a great turn 1 card and works brilliantly with sorcery's like krenko's command or dragon fodder to take out opponents small early creatures.


krenko mob boss



this guy is just awesome , he's a late game player in this deck being 4 mana as its a pure speed deck which works very well on only 3 mana, usually when he arrives I've already got quite a few goblins on the table and he works extremely well with....

goblin chieftain



this guy is awesome and one of the linchpins of the deck, not only does he give every goblin that comes in haste (tap Krenko when he arrives!!!) but also a +1/+1, just don't EVER block with him unless you want to lose the buff,

The remainder of the deck is mostly 1-1 goblins with a few instant spells that give a big boost to multiple goblins and my particular favorite...

door of destinies



a creature type is goblins thats any goblin!! and when it comes in the counters are put on door of destinies and stay on the door so every goblin gets a +1/+1 for every goblin that was played including itself!!
If this card comes in with krenko, goblin chieftain and legion loyalist in play thats an insane amount of high power/toughness creatures with trample haste and first strike!!

Example play:

I've got the loyalist, chieftain, 3 random 1-1 goblins the door of destinies in play and 4 mountains out.

I play Krenko for 4 mana and tap him immediately and put 6 1-1 goblin tokens (with haste and a +1/+1 thanks to the chieftain) into play, that's 7 goblins played this turn, 7 counters on on the door and each goblin has a +8/+8 and they all have first strike and trample thanks to the loyalist,

pretty good yes?

thats all..

Terrain log part 1

Hello I've decided to start a terrain log for my ongoing projects so here goes....

I've been building terrain for years, first out of cardboard, or the paper templates they used to include in the White dwarf many moons ago. 

 I built mountains and hills from chicken wire and paper mâché, ruins from the styrofoam packaging that all games workshops model sets came in, painstakingly glued cardboard to all the surfaces to make them smooth...

And now I've found this..

Foamcore is a foam sheet with a layer of paper on both sides and unlike styrofoam (balls!!) it has a much finer texture and it much better to cut and paint.

The main advantage which you will see in the following images is that the paper layer can be removed when required and details can be carved into the foam to create textures like bricks and battle damage.

Sections of the paper have been removed and a brick effect has been carved into the foam underneath..

The sides of the building where cut and the windows and doorways marked out as whole square pieces, the wall was then cut at an angle to give it that collapsed look..

...The cut off triangular sections were used to create the floors 

And finally the whole model was glued to a piece of hard board.

Hope you like them

I'll be back to show the painted version soon.

First post

This is my first post,

I will be using this blog as a project log and to put my ideas out there for anyone who has a vague interest in what I'm up to. 

I've been a gamer on and off for the last 22 years and have finally got to a place in my life where I am finally able to take on bigger projects and chase certain dreams  I've had for a while, 

So let's go.....